![]() ![]() It is going to cost you a difference of maybe twenty to thirty bucks for the length. The gas fór the procedure cán either be puré Argon ór it can bé a mixture óf Helium-Argon hás. On the other side for the DC purposes, it should pointed tip. If you are just tacking up one thing and calling it a day, you can get away with smaller.īut if you plan to weld up a big project go with the 4/0 wire. For TIG welding stainless steel, you got to put the polarity setting at the DC Electrode Negative setting which is also given by DCEN. The large clamp and large wire tends to carry away some of the heat from part. Both upper and lower jaws of all three models are made from a high. ![]() ![]() Applications include do-it-yourself, maintenance and repair and hobbyist. The clamp tends to crack from heat fracture less. A good ground clamp helps assure proper voltage for maximum weld results with all rods. The Forney Easy Weld 100 ST is a 120-volt, 90 AMP Stick and TIG capable welder. They tend to tarnish less, the wire and the clamp. This helps the electrical connection on the clamp. I use a very large heavy duty, brass clamp, rated at 400 amps as well. What size work lead (ground wire) do I need to run a 300 amp 220v tig welder?I use a thirty foot piece of 4/0 or 0000 wire and it gets warm after a day of 275 amp welding, TIG DC. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. Archives
March 2023
Categories |